| |
 |
|
|
|
| RW-26MBS Wood Cutting Band Saw |
| |
| Applications: |
| Used to cut wood material and polystyrene plastic. |
| |
|
| |
| FeaturesĄG |
| |
- Frame ĄGRugged sheet steel construction, braced for maximum rigidity.
- Table ĄG Precision ground cast iron. rib reinforced. Rear table support may be levelling adjusted. Fixed table without tilting when not in use.
- Blade GuardsĄGThe blade is completely guarded. only the operating portion is exposed for maximum operator safety. Blade guard can be swung out when not in use.
- Blade guidesĄGTop and bottom blade guides are ball bearing . Top guide with ball bearing backup supported.
- WheelsĄGMade of cast iron, dynamically balanced for smooth cutting, and fitted with rubber tire as standard equipment. Wheels mounted in precision ball bearings.
- Exhaust ChuthĄG4" diameter outlet, supplied as standard equipment.
- Wheel Cleaning BrushĄGProvide continuous cleaning action that greatly lengthens tire life.
|
| |
|
|
| Micro Adjust RIP Fence - Fence may be vertically adjusted providing bigger support especially for cutting higher stock. It can be swing away when not in use. Fence adjustment is accomplished by means of micro adjustment wheel. Fence alignment if necessary is made by turming a hand knob. |
Blade Tension and Tracking - A counter-balance weight applies proper tension on the blade. together with the blade tension adjustment hand wheel offering the best blade tension. Tracking handwheel incorporate thread adjustment for accurate, easy blade tracking. |
| |
|
|
| |
| Standard Equipment |
| |
- 1" Band Saw blade.
- Dust Chute (4" dia)
- Micro adjust rip fence.
- Wheel covered with rubber tire.
- Ball bearing blade guides
- Ball bearing backup support.
- Wheel cleaning brush.
- Motor with magnetic switch.
|
| |
| |
| SpecificationsĄG |
| |
| Model |
RW-18MBS |
RW-22MBS |
RW-26MBS |
RW-28MBS |
| Blade to column |
15-3/4"(400mm) |
18-1/2" (470mm) |
23-5/8"(600mm) |
24-3/8"(620mm) |
| Maximum work thickness |
9-3/4" (250mm) |
11-3/8"(290mm) |
15-3/4"(400mm) |
17-3/4"(450mm) |
| Table size (L*W) |
19-5/8"* 16-1/8"
(500 * 410mm)
|
22-3/4" * 17"
(580 * 430mm) |
28" * 23-5/8"
(710 * 600mm) |
28" * 23-5/8"
(710 * 600mm) |
| Table in front of blade |
175 mm |
195 mm |
240 mm |
240 mm |
| Table tilt |
not avaiilable |
not avaiilable |
not avaiilable |
not avaiilable |
| Table height from floor |
20" |
23" |
32-1/2" |
32-1/2" |
| Wheel diameter |
18"(457mm) |
22"(559mm) |
26"(660mm) |
28"(711mm) |
| Wheel width |
1-1/2"(38mm) |
2"(50.8mm) |
2"(50.8mm) |
3"(76.2mm) |
| Wheel Speed |
560RPM |
560RPM |
700RPM |
650RPM |
| Blade length |
125"(3170mm) |
135"(3420mm) |
177"(4500mm) |
185"(4700mm) |
| Blade width |
1/2", 3/4, 1" |
1/2", 3/4, 1" ,11/2" |
1/2", 3/4, 1" ,11/2",
2" |
1/2", 3/4, 1" ,11/2",
2" , 3" |
| Motor |
1HP |
1HP |
2HP (3HP OPT.) |
3HP (5HP OPT.) |
| Net weight |
180kgs |
210kgs |
320kgs |
450kgs |
| Gross weight |
250kgs |
280kgs |
420kgs |
550kgs |
Packing
dimensions
( L* W * H) |
32' * 27' * 67" |
36" * 28" * 71" |
860" * 1160* 2160 |
860 * 1160 *2160 |
|
| |
|
|
| |
Giant Red-Wood International & Co., Ltd. |
AddressĄG290 Wanshou Rd., Sec. 1,Kueishan Hsiang,
Taoyuan Hsien, Taiwan 333 |
TelĄG886-2-8209 1151 FaxĄG886-2-8200 3618 |
|
| |
|
|
