| |
 |
|
|
|
|
Application |
|
The m/c is suitable for bonding tape, cotton belt, zipper, socket, paper, cable wire, flexible cord, metalic sheet etc., for sizing cutting use.
|
|
| |
|
|
| |
|
|
Application |
|
Control auto pitch setting by simply turning switch knob (M2-M16, or 12-64 threads per inch), no need to change gear pitch or pilot tap |
|
Operation initiated with only a light step on the foot switch |
|
Work pieces will not lift during tapping (30 units/min.) |
|
| |
|
|
| RW-16B Automatic Tapping /Drilling Machine |
Application |
|
Control auto pitch setting by simply turning switch knob (M2-M16, or 12-64 threads per inch), no need to change gear pitch or pilot tap
|
|
Operation initiated with only a light step on the foot switch |
|
Work pieces will not lift during tapping (30 units/min.)
|
|
| |
|
| |
Application |
|
Strong Power- This punching machine is operated by hydraulic pressure. |
|
Easy Time Setting- With timer which is different from conventional method. |
|
Low noise hydraulic press punching- Do not need to bear the noise from cam press punching |
 |
With foot switch for operation convenience. Save time and increase your profit. |
|
|
|
|
| Applications: |
|
Used to cut wood material and polystyrene plastic. |
|
| |
|
|
Application |
|
Suitable for the cutting of various kinds of cloths, PP and PVC materials. |
|
| |
|
|
|
Application |
|
This m/c has a wholely hydarulic automatic-control system applicable to leather ,plastic sheet, bubble cotton fabric, toy fabric, E.V.A double side tape synthetic fiber and nonmetallic material forming cut-off operation.
|
|
|
| |
|
| RW-013 Hydraulic High Speed Cutting Machine |
Application |
|
This machine has a wholely hydarulic automatic-control system applicable to leather, Plastic sheet, bubble cotton fabric, toy fabric, small wood board and vacuum forming cut-off operations as will as synthetic fiber and nonmetallic material forming cut-off operations. |
|
|
|
|
|
|
|
Application |
|
This machine is special designed for forming of two sides of aluminum ladders at a time. |
|
|
|
|
|
|
The machine is specially designed for metal deep drawing use. |
|
|
|
|
|
Application |
|
The rigidity, strength & precision etc., of machinery are all manufactured accorded by the manufacturing standard . |
|
The hydraulic systems of machinery are through accurate design and perfective tested, excellence of performance . |
|
Two steps speed control, the first rapid downward and slow speed pressed follow up, avoid collision, advance the precision of machining and stability of operation. |
|
Equipped with limit device of stroke elevation and overload protecting device of compression, promote the safety of operation. The foot pedal switch can be controlled the up & down and coupled the dies for making manual, semi- auto , auto etc., processing operating |
|
|
| |
|
|
| |
Giant Red-Wood International & Co., Ltd. |
AddressĄG290 Wanshou Rd., Sec. 1,Kueishan Hsiang,
Taoyuan Hsien, Taiwan 333 |
TelĄG886-2-8209 1151 FaxĄG886-2-8200 3618 |
|
| |
|
|
